Milwaukee M18 Fuel 4 Piece Power Pack 4A3

Part of the Milwaukee range, the M18 Fuel 4 Piece Power Pack 4A3 is a Power Tool Kit specified for reliable everyday performance.

1 x Milwaukee M18FPD30 18V Li-ion Cordless Brushless FUEL GEN 4 13mm Hammer Drill Driver – Skin Only

The M18 FUEL 13 mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStop Control Mode for Enhanced Safety. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for improved productivity. At only 175 mm in length, it delivers maximum access and manoeuvrability in tight spaces. The AutoStop Control Mode provides enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUS intelligence maintains maximum performance and protection from overloads, heating, and over-discharge, whilst the all-metal ratcheting chuck delivers improved grip strength, durability, and corrosion resistance.

1 x Milwaukee M18FID30 18V Li-ion Cordless FUEL GEN 4 1/4" Hex Impact Driver – Skin Only

The M18 FUEL 1/4" Hex Impact Driver features the POWERSTATE Brushless motor, which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUS intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. The 4-mode drive control delivers users with greater control over output speed and power. Self-Tapping Screw Mode is built to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.

1 x Milwaukee M18FAG125XPD-0 18V Li-ion Cordless FUEL Brushless 125mm (5") Angle Grinder with Deadman Paddle Switch – Skin Only

The M18 fuel 125mm (5") angle grinder with deadman paddle switch is the next advancement in power and performance, fast cutting, and a lighter and more compact design when compared to the current model. The powerstate brushless motor delivers maximum sustained power and 8500 RPM to remove material faster and increase productivity. Redlink plus intelligence maintains unmatched levels of performance, protection, and compatibility. The M18 fuel 125mm (5") angle grinder with deadman paddle switch includes an electronic clutch for kickback protection, as well as overload protection to maximise motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes and less downtime while remaining fully compatible with the most common accessories in the market. The Milwaukee M18 fuel 125mm (5") angle grinder with deadman paddle switch takes cordless grinders to the next level.

1 x Milwaukee M18FH-0 18V Li-ion Cordless Brushless 26m SDS Plus Rotary Hammer Drill – Skin Only

The M18 fuel 26mm SDS plus rotary hammer delivers fast drilling, hard-hitting performance and maximum control for productivity on the job site. Built to achieve top performance with only moderate pressure, the rotary hammer is compatible with all M18 redlithium-ion batteries, and is optimised for use with M18 redlithium-ion high-output 6.0Ah batteries (sold separately). The powerstate brushless motor delivers users 2.7J of impact energy, 1330 RPM, and 4800 BPM, providing speed and power in the most demanding applications. Redlink plus intelligence tool technology maintains maximum rotary drill performance and protects the tool from overload, overheating, and over-discharge. The Milwaukee M18 fuel 26mm SDS plus rotary hammer includes autostop kickback control for maximum control and enhanced safety, with the tool sensing a bind-up situation when users are drilling in rebar or hard aggregate and stopping over-rotation, without the need for the user to release the trigger, indicated by the autostop indicator LED. The anti-vibration system (AVS) minimises vibration for maximum comfort when in use for extended periods.

3 x Milwaukee M18B5 18V 5.0Ah Li-Ion RED LITHIUM Battery

The M18 5.0Ah redlithium-ion battery features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 5.0Ah redlithium-ion battery features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimising heat, and prevents pack failures from vibration or drops. This unique Milwaukee design also enables the battery to operate in extreme cold weather conditions (below – 180 °C). Managed by Milwaukee's exclusive redlink intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.

1 x Milwaukee M12-18FC 12V – 18V Multi Voltage Rapid Battery Charger

Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi-voltage charger, M12-18FC, can sequentially charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.

Key Features

• 1 x MILWAUKEE 18V FUEL™ 13mm Hammer Drill/Driver Skin M18FPD30
• 1 x MILWAUKEE 18V FUEL™ 1/4" Hex Impact Driver Skin M18FID30
• 1 x MILWAUKEE 18V FUEL™ Brushless 125mm Angle Grinder w. Deadman Paddle Switch Skin M18FAG125XPD-0
• 1 x MILWAUKEE 18V FUEL™ 26mm SDS Plus Rotary Hammer Skin M18FH-0
• 3 x MILWAUKEE 18V 5.0Ah Red Lithium-Ion Battery M18B5
• 1 x MILWAUKEE 12V/18V Multi Voltage Rapid Charger M12-18FC
• 1 x MILWAUKEE Carrying Case
• POWERSTATE Brushless Motor delivers 158 Nm of Max Torque with 2,100 RPM and 33,000 BPM
• Redesigned trigger mechanism with improved fitment and smoother acceleration delivers the ultimate trigger control
• Provides an enhanced safety control mode, AUTOSTOP, preventing over-rotations in bind-up situations
• New M-Clutch design enables the tool to handle a wider range of torque settings with improved drilling and fastening performance
• 1 x bit holder
• 1 x belt clip
• Enhanced motor gives the M18FID3 0-4400 IPM and 226 Nm of max torque.
• Delivers the user with the ability to deliver power to more demanding applications back-to-back.
• Enhanced motor delivers an improved 3900 RPM when compared to previous generations.
• Delivers the user with an improved range of speed to complete the application fast and with minimal downtime.
• Redesigned trigger mechanism with improved fitment and smoother acceleration.
• Tri-LED lighting illuminates the area of work while eliminating shadows.
• 4-mode drive control delivers users with greater control over the output speed and power.
• 1 x anti-vibration side handle.
• 1 x 125mm (5") type 27 guard.
• 1 x type 1 clip-on guard.
• 1 x backing flange.
• 1 x spanner wrench.
• 2 x vent clips.
• Next-generation M18CAG125XPD with electronic and ergonomic upgrade.
• More compact, lightweight, and balanced design enables for more comfortable and manoeuvrable use.
• Powerstate brushless motor delivers 8500 RPME-Clutch with kickback protection.
• Fixtec system enables 100% tool-free wheel change.

Specifications

• Voltage: 18V
• Chuck Type: 13mm Metal Chuck
• No load speed: Speed 1: 0 – 500rpm Speed 2: 0 – 2100rpm
• Blows per minute: 0 – 33,000bpm
• Torque: 158Nm
• Length: 175mm
• Weight: 1.5kg
• Voltage: 18V
• Chuck Type: 1/4" Hex
• Maximum Torque: 226Nm
• Drive Control Speed: Mode 1: 0 – 1700rpm Mode 2: 3000rpm Mode 3: 3900rpm Mode 4: 3900rpm
• Drive Control Impacts: Mode 1: 0 – 1400ipm Mode 2: 3600ipm Mode 3: 4400ipm Mode 4: 4400ipm
• Overall Length: 113.5mm
• Weight: 1.0kg
• Wheel Diameter: 125 mm (5")
• Switch Type: Paddle Switch
• No-Lock No Load: RPM 8,500
• Spindle: M14
• E-Clutch / Kickback Protection: Yes
• Overload Protection: Yes
• Tool-Free Guard Change: Yes
• Tool-Free Accessory Change: Yes
• Anti-Vibration Handle: Yes
• Power: 18V
• Max Capacity: 26 mm
• Impact Energy: 2.7
• JRPM: 1,330BPM 4,800BPM
• Kickback Prevention: Yes
• Anti-Vibration: Yes
• Length: 296 mm